Sugiman, ST., MT., PhD.

Nama : Sugiman ST., M.T., Ph.D.
NIP : 19730731200003 1 001
Jabatan Struktural : Ketua Jurusan
Email : s.sugiman@unram.ac.id
Pendidikan S1 : Bachelor in Engineering, Department of Nuclear Engineering, Gadjah Mada  University, Yogyakarta, Indonesia
Pendidikan S2 : Master in Engineering, Material Sciences, Department of Mechanical, Engineering, Gadjah Mada University, Yogyakarta, Indonesia.
Pendidikan S3 : PhD in Materials Engineering, Division of Mechanical, Medical and Aerospace Engineering, Faculty of Engineering and Physical Sciences, University of Surrey, Guildford, Surrey, UK.

Research Interest

  1. Durability of adhesively bonded joints and composite materials; experimental and finite element modeling.
  2. Damage modelling in adhesively bonded joints and composite materials.
  3. Toughening of polymeric matrix composite materials.

Expertise – Experimental stress analysis using strain gauges. – Finite element modeling using ABAQUS finite element code. – Damage modeling in adhesive joints and composites materials using cohesive zone and continuum damage approach. Job – Reviewers of Journal of Adhesion Science and Technology (Taylor and Francis). – Reviewers of Journal of Adhesion (Taylor and Francis)  Awards Best Paper Award in International Conference on Materials and Metallurgical Technology (INCOMMET) 2009, ITS Surabaya, Indonesia.

 Publications

  1. Sugiman and Paryanto Dwi Setyawan, 2013, Surface Treatment of Fly Ash for Improving the Tensile Strength of Fly Ash/Unsaturated Polyester Composites,  Makara Seri Teknologi, 17(3): In Press. DOI: 10.7454/mst.v17i3.xxxx.
  2. Sugiman, AD Crocombe, The static failure prediction of adhesively bonded structures using a continuum damage approach, submitted to International Journal of Technology (2013).
  3. Sugiman, AD. Crocombe, IA. Aschroft, Modelling the static response of unaged adhesively bonded structures, Engineering Fracture Mechanics (2013), 98, 296-314.
  4. Sugiman, AD. Crocombe, IA. Aschroft, Experimental and numerical investigation of the static response of environmentally aged adhesively bonded joints, International Journal Adhesion and Adhesives (2013), 40, 224-237.
  5. S. Sugiman, AD. Crocombe, IA. Aschroft, The fatigue response of environmentally degraded adhesively bonded aluminium structures, International Journal Adhesion and Adhesives (2013), 41, 80-91.
  6. Sugiman, AD. Crocombe, The static and fatigue response of metal laminate and hybrid fibre-metal laminate doublers joints under tension loading, Composite Structures (2012), 94(9), 2937-2951.
  7. Sugiman, AD. Crocombe, KB. Katnam, Investigating the static response of hybrid fibre-metal laminate bonded structures, Composite Part B: Engineering (2011), 42, 1867-1884.
  8. Katnam K.B., Crocombe, A.D., Sugiman S., Khoramishad, H., Aschroft, I.A., Static and fatigue failure of adhesively bonded laminate joints in moist environments, International Journal of Damage Mechanics (2011), 20(8), 1217-1242.
  9. Sugiman, The effect of surface treatment and the content of scrap rubber tire on the mechanical properties of epoxy adhesives (in Indonesia), Journal of Mechanical Engineering (2008), Vol.8, No.2, pp. 107-117.
  10. Sugiman, Fracture toughness of adhesively bonded carbon steel joints using rubber modified epoxy adhesives (in Indonesia), Journal of Rekayasa 2007, Vol. 8 No. 1, pp. 9-19.
  11. Setyawan, P.D., Sugiman, Effect of fiber orientation and core thickness on the compressive and flexural strength of the sandwich composites (in Indonesia), Journal of Rekayasa 2006, Vol.7 No.1, pp 21-30.
  12. Sugiman and Masri, Moisture effect on the crack growth speed of glass/polyester composites bonded joints (in Indonesia), Journal of Mechanical Engineering 2006, Vol. 8, No.2, pp. 49-56.
  13. Catur, A.D., Sugiman, Herlinasari, N., Humaini, Zulpawardi, Mechanical properties of unsaturated polyester-polystyrene polymer blend, Journal of Rekayasa, Vol 6, No.1 hal. 68-74, Juni 2005, ISSN: ISSN: 1411-5565.
  14. Sugiman, Effects of temperature and curing time on the fatigue strength using steel-filled epoxy adhesives (in Indonesia), 01 Edition/April 2006, ISSN 1858-4519, Panca Sakti University.
  15. Sugiman and Sujita, Effect of surface roughness and lap length on the failure of fiberglass/polyester composite repair (in Indonesia), Journal of Oryza, Vol. III, No.4, (2005) pp. 153-160.
  16. Sugiman and Herlinasari, N., Wood repair using Glass/epoxy Laminate Composites (in English), Journal of Rekayasa, Vol. 6, No.1, 2005, pp. 68-74.
  17. Nurchayati and Sugiman, Effect of surface roughness on the durability of adhesively bonded aluminum joints (in Indonesia), Journal of Oryza, Vol. IV, No.3 (2005) pp. 172-181.
  18. Sugiman, Effect of temperature and curing time of adhesive on the shear strength of adhesively bonded carbon steel joints (in Indonesia) Journal of Engineering, Vol. 6, No.1 (2005), pp. 68-74
  19. Sugiman, Effect of Adherend Surface Roughness and Adhesive Layer Thickness on the Shear Strength of Adhesively Bonded Carbon Steel Joints (in Indonesia) Journal of Oryza, Mataram University, Vol. I, No. 4, (2003), pp.1-12
  20. Malau, V., and Sugiman, Effects of temperature and curing time of adhesive on the fatigue strength adhesively bonded lap joints (in Indonesia) Technology Magazine, MEDIA TEKNIKA,  Vol. 3, No. 2, (2002)  pp. 39-46.

Conference papers

  1. L. Rhangga Aditya Warman, Sugiman, Agus Dwi Catur, Unjuk Kerja Fiber Metal Laminate Aluminium-Fiberglass-Bambu Terhadap Impak Berkecepatan Rendah, Proceeding Seminar Nasional Tahunan Teknik Mesin XIII (SNTTM XIII) Depok, 15 – 16 Oktober 2014.
  2. Umar Zaen, Sugiman, Paryanto Dwi Setyawan, Investigasi Kekuatan Bending Komposit Laminat Aluminium–Fiberglass–Bambu, Prosiding Seminar Nasional Perkembangan Riset dan Teknologi di Bidang Industri ke 20, Yogyakarta, 23 Juni 2014.
  3. Galing Kalapaksi, Paryanto Dwi Setyawan, Sugiman, Agus Dwi Catur, M. Faruq Ramadhani, Kekuatan Tarik dan Tekan Komposit Laminat Hibrid Aluminium-Fiberglass-Bambu, Prosiding Seminar Nasional Perkembangan Riset dan Teknologi di Bidang Industri ke 20, Yogyakarta, 23 Juni 2014.
  4. Sugiman and AD Crocombe, Cohesive zone and continuum damage approach on the predicting of the failure of adhesively bonded joints, Proceedings of National Seminar on Mechanical Engineering and Thermofluids XI, 16-17 October 2012, Yogyakarta, Indonesia.
  5. Setyawan PD and Sugiman, Investigation of tensile and impact strength of randomly sisal/scrap rubber tire-modified epoxy composites, Proceedings of National Seminar on Mechanical Engineering and Thermofluids XI, 16-17 October 2012, Yogyakarta, Indonesia.
  6. Setyawan PD and Sugiman, Effect of polystyrene and scrap rubber content on the tensile and impact strength of unsaturated polyester resin, Proceedings of National Seminar on Mechanical Engineering and Thermofluids XI, 16-17 October 2012, Yogyakarta, Indonesia.
  7. Sugiman, AD Crocombe, IA Aschroft, Experimental and numerical studies on the static and fatigue response of environmentally degraded adhesively bonded aluminium joints, Proceeding of International Conference in Adhesion ’11, 7-9 September 2011, York, UK.
  8. Sugiman, AD Crocombe, IA Aschroft, Investigating the static and fatigue response of hybrid fibre-metal laminate doublers loaded in tension, Proceeding of International Conference in Adhesion ’11, 7-9 September 2011, York, UK.
  9. Sugiman, Crocombe AD, Katnam KB, The static and fatigue response of doubler joints with a hybrid laminate substrate, Poster presentation, The 4th World Congress on Adhesion and Related Phenomena (WCARP IV) Arcachon, France 26-30 September 2010.
  10. A.D. Crocombe, K.B. Katnam, S. Sugiman, I.A. Ashcroft, Combined environmental-fatigue degradation of adhesively bonded structures, The 4th World Congress on Adhesion and Related Phenomena (WCARP IV) Arcachon, France 26-30 September 2010.
  11. K.B. Katnam, A.D. Crocombe, H. Khoramishad, Sugiman, and I.A. Ashcroft, Environmental-fatigue damage model for adhesively bonded laminated joints, The 3rd international conference on advanced computational engineering and experimenting (ACE-X 2009), Rome, Italy, June 2009.
  12. Sugiman, Mechanical properties of scrap rubber tire toughened epoxy, Proceedings of National Symposiums VI 2007, FT UMS Surakarta, 13 December 2007, p. M49-M55. ISSN: 1412-9612.
  13. Sugiman and PD Setyawan, Mechanical properties of imperata cylindrica fiber-reinforced composite, Proceedings of National Seminar of Metallurgy and Material 1, Department of Metallurgy and Material, University of Indonesia, 7-8 August 2007, Jakarta.
  14. PD Setyawan and Sugiman, Effect of fly-ash surface modification on the tensile properties of fly ash/polyester composite, Proceedings of  National Seminar of Metallurgy and Material 1, Department of Metallurgy and Material, University of Indonesia, 7-8 August 2007, Jakarta.
  15. Sugiman, Setyawan, P.D., Danny, A., Effect of filler content on the mechanical properties of fly ash/unsaturated polyester composite, Proceedings of National Conference, Petra Christian University,  14-15 February 2007, Surabaya, Indonesia.
  16. Sugiman and Sujita, Fatigue fracture mechanism of adhesively bonded steel joint using recycled rubber modified epoxy adhesive, Higher Education, Ministry of Education, Jakarta, 29-31 June 2005.
  17. Sugiman and Tawaf, N., Crack growth speed of steel adhesively bonded joint using toughened epoxy adhesives: Effect of adhesive thickness, Proceedings of National Conferences on Electrical, Mechanical and Civil Engineering, 17 September, 2005, Mataram, Indonesia.
  18. Sugiman, Experiments of wood structure repair: Effect of materials, geometry and surface treatment, Faculty of Engineering, Mataram University, 4 February 2005, Mataram, Indonesia.
  19. Sugiman, Effects of water contents and curing temperature on the failure of glass fiber/polyester composites (in Indonesia), Faculty of Engineering, University of Mataram (2004), Mataram, Indonesia.